Olympic Gunzite Epoxy Pool Paint Primer Gallon with Catalyst

Low VOC

• For Rough Surface Concrete or Gunite Swimming Pools.
• Includes Catalyst can that must be added to primer, and thoroughly mixed, 30 minutes prior to applying to pool surface.
• Pool can be painted within 4-24 hours, Do not let the Primer overcure or paint will not adhere to it and will all peel off within 6-12 months
• Note: Can Be Applied On Surfaces Previously Painted With Epoxy Paint Or Epoxy Primer, or bare raw gunite, concrete or plaster.
• Coverage 125 to 175 sqft per gallon per coat.

Compare to Smart Seal Paint Rough Epoxy Primer 660-GAL 26649 By Kelly Technical Coatings 

• Mfg #: 216-G
• UPC Code: 00801838070018

Gunzite is a two-part epoxy primer for application over fiberglass or unusually rough plaster or concrete.The heavy viscosity of GUNZITE acts as a fill coat on concrete and plaster and provides a much smoother surface.

GUNZITE should only be used as an undercoat for POXOLON 2 or ZERON.Especially effective on sandblasted surfaces.

• Applied Film Thickness 8-12 mils
• FlashPoint > 105 deg F
• Maximum Recoat Time Poxolon2 or Zeron 48 hrs
• Minimum Recoat Time Poxolon2 or Zeron 4 hrs @90 deg F
• Shelf Life 2 yrs
• Type 2 Part Epoxy Primer

Compare to Ramuc Self-priming High Build and EP epoxy pool paint

 California Residents WARNING: Cancer and Reproductive Harm

 www.P65Warnings.ca.gov