Praher Multiport Valve Complete 1.5″ for Lomart Spectra Sta-Rite Cristal Flo – Tm-12-L
$149.99
- Praher 1.5″ Multiport Filter Valve TM-12-L
- Fits Sand Filters
- Sta-rite Cristal-Flo
- Lomart Spectra 3 Spectra 4
- Doughboy Aquaview Sand Filters
- Replaces Sta-Rite Old Style Black Valves WC112-148 WC112-148A
- Replaces 14965-0028 Plug & Gasket
- Replaces Key cover and stem (cover & plug) 77704-0104
Description
Praher 1.5″ Multiport Filter Valve TM-12-L with Flange
Includes Flange Oring #442 O-236 7-1/4″ ID 1/4″ Cross Section
308-1265 Flange Gasket Oring needed if Using on Lomart, Embassy or Doughboy (not included)
Fits:
- Pentair Sta-rite Cristal-Flo Old Style
- Lomart Spectra 3 and Spectra 4
- Doughboy Aquaview Filters
NOTE: Does not include Flange Clamp
Uses Key Cover Assy: White: E-50-S1 E50S1 Black: E-50-S1B E50S1B
Replaces Sta-Rite Old Style Black Valves WC112-148 WC112-148A also can be used instead of 14965-0028 Plug & Gasket or Full Valve replacement for Key cover and stem (cover & plug) assembly 77704-0104
Can replace Lomart Spectra 3 and Spectra 4 Multiport valve 1107-2468. Must Use Gasket 308-1265. All parts except body are same as 1107-2468 Lomart valve.
Can replace Cooper Ranger Filter valves
Also Replaces Valves:
Poolco: Clamp Down
W Cooper: Ranger
Sta-rite: JSAL-01/03 JSAL-02-04
Doughboy 1107-2435 which Lomart 1107-2468 is the alt replacement
Uses Spoke Gasket G-416 or Pentair 271104
Consists of the following repair parts:
- E55-T12L Vlave Body 1121-1633 Lomart
- E-1-S1 Handle 1.5″ & 2″
- E-2-S1 Handle Pin 1.5″ & 2″
- E-3-S1 Washer 1.5″ & 2″
- E-6-S1B Cover Black 1.5″
- E-4-S1 Screw – Bolt M6 304SS (6 Req)
- E-14-S1 Nut M6 304SS (6 Req)
- E-3-S1 Washer 1.5″ & 2″
- E5-S1 Decal 1.5″
- E-7-S1 Cover Oring
- E-8-S1 Spring Washer (1 REQ)
- E-9-S1 Spring 1.5″ & 2″
- E-10-S1 Oring Shaft 1.5″ & 2″ #212 (2 req)
- E-11-S1 Diverter 1.5″
- E-12-S1 Spoke Gasket (271104 G-416)
- E-13-S1 Valve Body (Not Available)
- E-15-S1 Plug 1/4″
- E-16-S1 Gasket Sight Glass
- E-17-S1 Sight Glass Lexan
- E-18-442 Oring Valve Seat (Included)
- E-20-T1 Oring Standpipe 1.5″
NOTE: No Clamp, No Pressure Gauge, Includes Flange Oring E-18-442 for Pentair Sta-rite Cristal Flo U9-369
Uses Flange Oring E-18-442 Same As:
- Waterway: 873-E18442 805-442
- Aladdin: O-236 #442 7-1/4″ ID 1/4″ Cross Section
- Sta-rite: U9-369
- Jacuzzi: 47-0442-01-R 47-0442-33-R
Additional information
| Weight | 5.3 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.







Reviews
There are no reviews yet.