Jandy Conversion Kit Natural Gas to Propane JXi 400K

Description

Zodiac Jandy Propane Gas Orifice Kit For Model 400 JXI Heater

Will only work on Jandy JXi 400 Heaters

Use to Convert Natural Gas Heater to Use Propane

MPN: R0591608

You will need the following tools for CONVERSION:

• Permanent Marker (black)
• Digital Differential Pressure Manometer
• Manometer Accessories (hoses, tee, fittings)
• 3/16″ Hex Key
• 5/16″ Nut Driver
• 7/16″ Hollow Shaft Nut Driver
• Barbed Fittings (1/8″ NPT to 1/16″)
• Blunt Tool (Key or Phillips Head Screwdriver)
• Two Pipe Wrenches for Removing Gas Unions

Installation Steps Jandy® Pro Series, JXi
Pool & Spa Heater There are nine (9) steps to complete to ensure correct installation and implementation of the gas conversion procedure.
Failure to follow steps exactly and in the consecutive order listed in this instruction booklet (as well as all warnings, cautions, and notes associated with each step) may result in improper operation of the heater and possible property damage, personal injury, or death.

Installation steps are as follows:

• Step 1: Before You Start
• Step 2: Install the Gas Orifice
• Step 3: Install the Air Intake Orifice
• Step 4: Install the Fuel Line Sealing Grommet
• Step 5: Perform Gas Leak Test
• Step 6: Test the Inlet Pressure
• Step 7: Test the Gas Orifice Differential Offset Pressure
• Step 8: Check Normal Operating Sequence
• Step 9: Affix the Conversion Rating Plate to Heater
• Step 10: Complete and Send Mail-In Card