Olympic Gunzite Primer for Epoxy Pool Paint Gallon 2 Part – 216-G

Description

In Store Pick Up Only – Springfield Missouri

Olympic Gunzite Epoxy Pool Paint Primer Gallon with Catalyst

• Maximum Recoat Time Poxolon2 or Zeron 48 hrs (surface sanding required after cured)
• Minimum Recoat Time Poxolon2 or Zeron 4 hrs @90 deg F

Do not let the Primer overcure or paint will not adhere to it and will all peel off within 6-12 months

• Low VOC
• For Rough Surface Concrete or Gunite Swimming Pools.
• Includes Catalyst can that must be added to primer, and thoroughly mixed, 30 minutes prior to applying to pool surface.
• Pool can be painted within 4-24 hours, Do not let the Primer overcure or paint will not adhere to it and will all peel off within 6-12 months
• Note: Can Be Applied On Surfaces Previously Painted With Epoxy Paint Or Epoxy Primer, or bare raw gunite, concrete or plaster.
• Coverage 125 to 175 sqft per gallon per coat.
• Compare to Smart Seal Paint Rough Epoxy Primer 660-GAL 26649 By Kelly Technical Coatings now Camcoat

MPN: 216-G

UPC: 00801838070018

• Gunzite is a two-part epoxy primer for application over fiberglass or unusually rough plaster or concrete.
• The heavy viscosity of GUNZITE acts as a fill coat on concrete and plaster and provides a much smoother surface.
• GUNZITE should only be used as an undercoat for POXOLON 2 or ZERON.
• Especially effective on sandblasted surfaces.
• Applied Film Thickness 8-12 mils
• FlashPoint > 105 deg F
• Shelf Life 2 years
• Type 2 Part Epoxy Primer