Sale!

Vac-Alert VA-2000S Submerged Suction SVRS VGB

Original price was: $999.99.Current price is: $699.99.

In Stock Ready to Ship or Pick Up – Springfield Missouri

  • Vac-Alert Model VA-2000s
  • Submerged Suction 24″ below water level
  • For Spas or Pools with pump suction 24″ below water level
  • Complies with Ansi A112.19.8-2007 VGB 2008
  • 3 Year Factory Warranty

5 in stock

SKU: 330332 Category: Tags: , , , , Brand:

Description

Vac-Alert VA-2000S Safety Shut Down SVRS Safety Vacuum Release System

For Pumps with Submerged Suction, 24″ below water level surface

Complies with Ansi A112.19.8-2007 VGB 2008

Tests conducted by independent, third party laboratory demonstrate that Vac-Alert model VA-2000L
meets or exceeds the performance requirements set by IAPMO IGC 160-2002 for suction lift applications

Factory Note: For Pumps Operating 24/7 Factory Recommends Installation Of The VA-2000S (Even If It Is A Lift Application Situation).

  • SKU 330332
  • MPN VA-2000S
  • Item VAI-42-101
  • UPC 610377294300
  • The Vac-Alert Model VA-2000S is a Safety Vacuum Release System (SVRS) designed for submerged suction applications.
  • Submerged suction in this case applies to applications where the circulating pump suction is more than 24” below the level of the pool water surface.
  • The Model VA-2000S is recommended on commercial pool applications where the pump has a submerged suction of any depth and runs 24/7.
  • In submerged suction applications, for pumps 10 horsepower and greater, or for pumps located 10 feet or more below the water line, a pump shut-off switch (Model PSAC) is recommended.
  • The Model VA-2000S unit incorporates a 0.375” diameter orifice opening installed below the surge tube section.
  • This orifice opening is sized to provide a limited amount of pump start-up surge protection,
    while at the same time allowing enough air into the piping system to insure dissipation of the dynamic suction force caused by the circulating pump.
  • The Model VA-2000S SVRS unit also utilizes a check valve assembly equipped with a 0.25 pound spring and a non-vented poppet (no poppet disc or hole through the poppet).
  • This check valve assembly utilizes a light duty spring to minimize the sealing force of the check valve.
  • The non-vented poppet insures that water from the circulating system, under a positive hydrostatic head condition, does not migrate up into the SVRS unit.

Documents
Brochure
Install Guide

Additional information

Weight 7 lbs
Dimensions 8 × 8 × 21 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Featured Products

Product Categories
Brands