Vacless Maintenance Kit for Svrs Systems

Description

Vacless SVRS System Maintenance Kit w/ Lube and Orings. MPN: VAC55 UPC: 00710033387138 Includes: 2 O-ring, Silicone Lube in Dropper Bottle, Cotton Swabs, Teflon Tape, Pool Vacuuming (SVRS Disable) Rubber Stopper Red PlugVacless SVRS Maintenance and Testing Procedure 1. Maintenance (Use Kit P/N VAC55):a) Check to insure the piston (1) is functioning properly by pushing the piston protruding pin (2) few times. The piston should move freely with reasonable finger pushes.b) For sluggish piston; lubricate the piston O-ring using the provided lubrication dropper bottle P/N VAC50 by squeezing few drops equally spaced thru the small perforations (3) and evenly spread the lubricant to wet the O-ring by cycling (pushing) the piston several times.c) Repeat step a. If the piston is still sluggish or sticking, remove the valve from the pump, remove the two screws (4); disassemble the cap (5), remove the piston from the cap, clean and lubricate the piston O-ring, clean and lube the inside of the cap, reinstall the spring and reassemble the valve using fresh Teflon tape or Teflon paste (if needed).d) Repeat step a. If the piston is still sluggish or sticking, please call Vacless technical support at (818)701-6200.e) During the pool floor vacuuming use the provided red plug to maintain the cleaner’s elevated vacuum level. Start the pump then install the plug after the piston is depressed. 2. Testing:a) After servicing as shown above, perform monthly tests per the device Users Manual paragraph #6* The red plug must be removed after vacuuming. Available Online or In Store / Curbside Can be ordered for In Store / Curbside in Springfield Missouri 65804